GENERAL TERMS & CONDITIONS
Supply of Goods, Equipment & Installation Services
Residential | Commercial | Industrial | Solar PV | Battery Storage | Electrical Works
Company | GridSecure Energy (Pty) Ltd |
Registration No. | 2012/142648/07 |
Contact | info@gridsecureenergy.co.za | 087 012 6440 |
Document version | Version 1.0 | 27 July 2026 |
IMPORTANT These terms are intended to govern both supply-only transactions and projects that include design, installation, commissioning or related services. The accepted quotation and any project-specific written variations take precedence where they conflict with these general terms. Nothing in this document is intended to exclude statutory rights that cannot lawfully be excluded. |
1. Application, Agreement and Acceptance
1.1 These General Terms and Conditions (“Terms”) apply to quotations, orders, sales, deliveries and services provided by GridSecure Energy (Pty) Ltd (“GridSecure Energy”, “Contractor”, “we”, “us”) unless expressly agreed otherwise in writing.
1.2 An agreement is concluded when the Client accepts a quotation or order confirmation in writing, signs the quotation, pays a required deposit, or otherwise instructs GridSecure Energy to proceed.
1.3 The agreement comprises the accepted quotation, project-specific scope and specifications, any written variations or addenda, and these Terms.
1.4 If there is any inconsistency between documents, the following order of precedence applies:
· the accepted quotation and project-specific scope of work;
· any written variation or addendum subsequently agreed by the parties;
· any project-specific design, installation or warranty schedule;
· these General Terms and Conditions.
1.5 Nothing in these Terms is intended to exclude or restrict any right afforded under the Consumer Protection Act 68 of 2008 (“CPA”), the Occupational Health and Safety Act, applicable electrical legislation, or any other law where that right cannot lawfully be excluded.
2. Definitions
2.1 “Client” means the natural or juristic person purchasing Goods and/or Services from GridSecure Energy.
2.2 “Goods” means equipment, components, materials or products supplied by GridSecure Energy.
2.3 “Services” means design, installation, testing, commissioning, maintenance, repair, consultation or other services described in the quotation.
2.4 “Project” means the Goods and/or Services described in an accepted quotation.
2.5 “Manufacturer/OEM” means the original equipment manufacturer responsible for a product warranty.
2.6 “Practical Completion” means the stage at which the contracted installation is substantially complete, operational and capable of its intended use, excluding minor snag items that do not materially prevent use.
2.7 “Variation” means a change, addition or omission to the accepted scope requested by the Client or reasonably required due to site conditions not apparent at quotation stage.
3. Quotations and Pricing
3.1 Quotations remain valid for the period stated on the quotation and are subject to stock availability until accepted and the required procurement payment has cleared.
3.2 Prices are in South African Rand unless expressly stated otherwise.
3.3 All pricing totals displayed on GridSecure Energy quotations are inclusive of VAT, unless expressly stated otherwise on the quotation.
3.4 Where individual line items are displayed exclusive of VAT for calculation purposes, the final quotation total payable by the Client will clearly reflect the VAT-inclusive amount.
3.5 Pricing is based on the scope, quantities, product specifications, site information and assumptions available at the time of quotation.
3.6 After acceptance, the agreed project price will not be changed without notice. An adjustment may be required where:
· the Client changes the agreed scope or specification;
· additional work is required because of concealed, undisclosed or pre-existing site conditions;
· the Client requests different equipment or relocation of equipment;
· statutory taxes, duties, levies or regulatory charges change;
· a material foreign-exchange adjustment applies before procurement where the quotation expressly provides for this;
· quoted equipment becomes unavailable and an alternative is agreed in writing.
3.7 Any variation affecting price or scope will be communicated and, wherever reasonably possible, approved before the additional work or supply proceeds.
4. Payment Terms
4.1 Payment terms are those stated on the accepted quotation or invoice and may be structured as full payment, deposit-and-balance, or milestone payments.
4.2 Installation scheduling and equipment procurement may be conditional on receipt of the required payment milestone.
4.3 Payments must be made by the agreed due dates and without unauthorised deductions.
4.4 Interest on overdue amounts may be charged only at the rate expressly agreed in the quotation or agreement, or otherwise at the applicable lawful prescribed rate.
4.5 If an undisputed amount remains overdue after reasonable written notice, GridSecure Energy may suspend procurement, delivery, installation or commissioning until payment is made. The programme may be extended by the resulting delay.
4.6 The Client may not withhold an undisputed amount properly due merely because a separate dispute exists in relation to another part of the Project, without prejudice to any statutory rights.
5. Ownership, Risk and Care of Goods
5.1 Ownership of Goods supplied by GridSecure Energy remains vested in GridSecure Energy until amounts owing for those Goods have been paid in full, to the extent permitted by law.
5.2 Risk in Goods passes at the stage stated in the quotation. If not stated, risk passes when the Goods are delivered to the Client’s premises or incorporated into the installation, whichever is appropriate to the transaction.
5.3 The Client must take reasonable care of equipment delivered to site and must not permit unauthorised removal, alteration or use before handover.
6. Equipment Availability and Substitution
6.1 Goods are subject to manufacturer and distributor availability.
6.2 GridSecure Energy will not substitute a material item with a materially different product without notifying the Client and obtaining agreement where the change affects performance, warranty, appearance or price.
6.3 Where a quoted product becomes unavailable, GridSecure Energy may propose an equivalent or improved alternative.
6.4 Minor manufacturer revisions, firmware updates or model-number changes that do not materially reduce the agreed functionality may be accommodated where technically appropriate.
7. Delivery, Installation Programme and Delays
7.1 Delivery and installation dates are estimates unless expressly stated in writing to be fixed contractual dates.
7.2 Dates may be affected by stock availability, import or customs delays, weather, site access, safety conditions, Client changes, availability of specialist personnel, utility or municipal processes, and other circumstances beyond reasonable control.
7.3 GridSecure Energy will keep the Client reasonably informed of material delays.
7.4 A reasonable delay caused by circumstances beyond GridSecure Energy’s control does not constitute a breach, and the completion date will be adjusted accordingly.
8. Site Access and Client Responsibilities
8.1 The Client must provide safe and reasonable access to the site during agreed working hours.
8.2 The Client must disclose information reasonably relevant to the work, including known electrical defects, roof leaks, structural concerns, hazardous materials, generator arrangements, existing PV/battery equipment, underground services and known non-compliant alterations.
8.3 Unless expressly included, the Client is responsible for obtaining landlord, body corporate, homeowners’ association or property-owner approvals.
8.4 The Client must provide existing Certificates of Compliance and other relevant site documents where reasonably requested.
8.5 The Client is responsible for operating and maintaining the completed system in accordance with the manufacturer’s requirements and for notifying its insurer where required.
9. Pre-Existing and Concealed Conditions
9.1 A quotation is based on conditions reasonably visible, accessible or disclosed at assessment stage.
9.2 GridSecure Energy is not responsible for pre-existing defects unrelated to its work, including defective wiring, inadequate distribution boards, damaged roofs, corrosion, water ingress, inadequate existing earthing, concealed services or prior non-compliant work.
9.3 If such conditions materially affect the Project, GridSecure Energy will notify the Client and may quote separately for remedial work.
9.4 No additional chargeable work will be undertaken without approval, except where immediate temporary action is reasonably necessary to prevent an imminent electrical or safety hazard.
10. Variations and Additional Work
10.1 Any change requested by the Client outside the accepted scope constitutes a Variation and may affect price and programme.
10.2 Wherever reasonably possible, the scope, price and time effect of a Variation will be recorded in writing before the work proceeds.
10.3 Typical Variations include relocation of equipment, additional cabling or trenching, additional distribution-board work, remedial electrical work, roof repairs, additional earthing, structural modifications, municipal work outside scope, or additional equipment requested during installation.
11. Electrical, Solar and Installation Compliance
11.1 Work performed by GridSecure Energy will be carried out in accordance with the applicable legal and technical requirements relevant to that work, including applicable SANS standards, electrical regulations, manufacturer instructions and utility or municipal requirements.
11.2 Where applicable, this includes requirements relating to electrical safety, PV installation, battery systems, earthing and bonding, isolation, surge protection, labelling, testing and commissioning.
11.3 GridSecure Energy will use appropriately qualified or registered persons for work requiring specific electrical qualifications or registrations.
11.4 Where required by law, an electrical Certificate of Compliance will be issued for work performed by GridSecure Energy after testing and commissioning.
11.5 A CoC issued for GridSecure Energy’s work does not retrospectively certify unrelated existing electrical work elsewhere on the property.
12. Earthing and Bonding
12.1 PV arrays and conductive mounting components will be bonded and earthed in accordance with the applicable design, manufacturer requirements and electrical standards.
12.2 Where required by the design or quoted scope, dedicated PV bonding conductors, additional earthing conductors and earth electrodes may be installed and bonded into the common earthing system.
12.3 Earth-resistance testing will be performed where required. Where the Project specifies a target value, reasonable additional electrodes or corrective measures may be required to achieve that target.
12.4 Additional earthing work beyond the quoted allowance may be treated as a Variation if required because of site conditions that could not reasonably have been established beforehand.
13. Roof, Mounting Systems and Structural Matters
13.1 Solar mounting systems will be installed in accordance with the applicable manufacturer’s requirements and the approved layout.
13.2 Software-generated mounting calculations are based on the input data and do not, by themselves, constitute certification of the existing building structure.
13.3 GridSecure Energy will perform a reasonable visual inspection of accessible roof areas relevant to the installation and will raise obvious concerns identified before or during the work.
13.4 GridSecure Energy is not a structural engineering practice and does not certify the structural capacity of a building unless an independent appropriately qualified structural engineer has been specifically appointed.
13.5 Where formal structural verification is required, GridSecure Energy may arrange an independent engineer as an additional professional service unless included in the quotation.
13.6 GridSecure Energy is not responsible for latent structural defects that could not reasonably be detected during an ordinary visual site inspection.
14. Manufacturer / OEM Product Warranties
14.1 Third-party Goods supplied by GridSecure Energy carry the applicable manufacturer or OEM warranty for the specific product.
14.2 The warranty period stated in the quotation, manufacturer datasheet or OEM warranty document applies and is not reduced to a blanket GridSecure Energy product-warranty period.
14.3 OEM warranties may be subject to conditions including correct installation, commissioning, registration, maintenance, firmware, environmental limits, operating conditions and protection requirements.
14.4 GridSecure Energy will reasonably assist with valid manufacturer warranty claims for Goods supplied by GridSecure Energy and, where practical, liaise with the distributor or OEM on the Client’s behalf.
14.5 Final acceptance, repair, replacement or credit of a manufacturer warranty claim remains subject to the applicable OEM warranty procedure and findings.
14.6 Nothing in this clause limits any statutory rights that apply to defective Goods.
15. Electrical Switchgear, Cables and Consumables
15.1 Electrical cables, circuit breakers, isolators, fuses, relays, connectors, lighting products and general electrical consumables do not carry an additional extended GridSecure Energy product warranty unless expressly stated by the relevant manufacturer or quotation.
15.2 Any manufacturer warranty specifically applicable to such an item remains subject to that manufacturer’s terms.
15.3 This does not exclude statutory rights applicable to defective Goods.
15.4 Failure caused directly by defective installation workmanship remains subject to the workmanship warranty in clause 16.
16. Five-Year Workmanship Warranty
16.1 Unless a different period is expressly stated in the quotation, GridSecure Energy provides a five (5) year workmanship warranty from the date of Practical Completion for installation work performed by GridSecure Energy.
16.2 The workmanship warranty covers defects caused directly by defective installation workmanship within the agreed scope, including, where applicable, electrical terminations, cable installation, equipment mounting, PV mounting workmanship, bonding and installation-related connections.
16.3 The workmanship warranty is separate from manufacturer product warranties.
16.4 The workmanship warranty does not cover failure or damage caused by matters outside GridSecure Energy’s control, including:
· manufacturer product failure;
· lightning or abnormal surge events outside the protection capability of the installed system;
· flooding, storms or other extreme environmental events;
· fire not caused by GridSecure Energy’s workmanship;
· theft, vandalism or accidental physical damage;
· pests or animals;
· corrosion or environmental conditions outside the applicable product specification;
· misuse, abnormal operating conditions or overloading;
· unauthorised modifications, repairs or additions by third parties;
· failure to follow manufacturer maintenance or operating requirements;
· pre-existing defects in electrical or building infrastructure;
· ordinary wear and tear.
16.5 Nothing in this warranty limits statutory rights that cannot lawfully be excluded.
17. Maintenance and Ongoing Support
17.1 Routine servicing and preventative maintenance are not included unless specifically stated in the quotation or a maintenance agreement.
17.2 The Client is responsible for manufacturer-required maintenance and for keeping equipment within specified environmental and operating conditions.
17.3 GridSecure Energy may provide monitoring, maintenance, fault-finding, inspections, configuration support and upgrades under a separate quotation or maintenance agreement.
17.4 Failure to undertake manufacturer-required maintenance may affect the applicable OEM warranty.
18. System Performance, Yield and Savings Estimates
18.1 Energy-production forecasts, grid-independence percentages, electricity savings, payback calculations and battery-autonomy figures are estimates based on modelling assumptions unless expressly guaranteed in writing.
18.2 Actual performance may vary due to weather, irradiation, shading, temperature, consumption patterns, load timing, battery settings, utility outages, equipment availability, degradation, tariff changes and future changes in load.
18.3 An estimated yield, saving, payback period or grid-independence percentage is therefore not a guaranteed performance figure unless the quotation expressly states otherwise.
19. Monitoring, Software and Internet Connectivity
19.1 Remote monitoring and smart functions may depend on internet connectivity, manufacturer cloud platforms, mobile applications and third-party telecommunications services.
19.2 GridSecure Energy does not control the ongoing availability, functionality or policy of third-party cloud or telecommunications platforms.
19.3 Unless expressly included, the Client is responsible for maintaining suitable internet connectivity at the installation site.
20. Municipal, Utility and Third-Party Approvals
20.1 Where municipal, utility, embedded-generation or professional approval is required, the quotation will state whether the related application service is included.
20.2 Approval timelines and decisions of municipalities, utilities, professional engineers or other third parties are outside GridSecure Energy’s direct control.
20.3 Unless expressly included, utility fees, meter changes, municipal charges and professional-engineering fees are excluded from the contract price.
21. Returns, Cancellations and Special-Order Goods
21.1 Returns and cancellations are subject to applicable law and the nature of the Goods or Services concerned.
21.2 Standard non-defective stock may be accepted for return only with prior written approval, in complete and resaleable condition, and may be subject to a reasonable handling charge to the extent permitted by law.
21.3 Special-order, configured, customised, commissioned or imported Goods procured specifically for a Client may not be returnable except where required by law.
21.4 Where a Client cancels an accepted project after costs have reasonably been incurred, GridSecure Energy may recover reasonable costs or a reasonable cancellation charge to the extent permitted by applicable law.
21.5 Nothing in this clause limits statutory rights in respect of defective, unsafe or unsuitable Goods where applicable.
22. Defects, Snagging and Complaints
22.1 The Client should notify GridSecure Energy in writing of any defect, concern or snag as soon as reasonably possible after becoming aware of it.
22.2 The Client must provide reasonable access for inspection and diagnosis.
22.3 Where a defect is attributable to GridSecure Energy’s workmanship, it will be addressed under the workmanship warranty.
22.4 Where the issue is attributable to an equipment defect, the applicable manufacturer or statutory remedy will be followed.
22.5 A snag-reporting period after completion is intended to facilitate prompt rectification and does not extinguish contractual or statutory warranty rights.
23. Force Majeure
23.1 Neither party is liable for failure or delay caused by an event beyond that party’s reasonable control, excluding an obligation to pay amounts already due.
23.2 Such events may include severe weather, natural disaster, war, civil unrest, strikes, epidemic or pandemic, government restrictions, port or customs disruption, major supply-chain interruption, widespread utility failure, or comparable events.
23.3 The affected party must take reasonable steps to minimise the effect of the event and resume performance when reasonably possible.
24. Liability and Damage
24.1 GridSecure Energy will exercise reasonable skill and care in performing its Services.
24.2 GridSecure Energy remains responsible for direct damage caused by proven negligent or defective workmanship to the extent required by applicable law.
24.3 GridSecure Energy is not responsible for loss or damage caused by pre-existing defects, undisclosed conditions, third-party acts, misuse, unauthorised alterations or events outside its reasonable control.
24.4 To the maximum extent permitted by law, GridSecure Energy is not liable for indirect, consequential or purely economic loss that is not a reasonably foreseeable direct result of its breach, provided that nothing in this clause excludes liability that may not lawfully be excluded.
25. Insurance
25.1 GridSecure Energy will maintain business or liability insurance appropriate to its operations.
25.2 The Client remains responsible for maintaining appropriate building, contents and asset insurance and should notify its insurer of installed PV, battery, inverter, generator or EV-charging equipment where required.
26. Health and Safety
26.1 GridSecure Energy may suspend or postpone work where site conditions are unsafe or where work cannot reasonably be performed in compliance with health and safety requirements.
26.2 The Client must disclose known hazards and must not interfere with safety barriers, temporary isolations or work areas established by GridSecure Energy.
27. Intellectual Property and Project Documents
27.1 Designs, drawings, schematics, calculations, proposals and technical documents prepared by GridSecure Energy remain its intellectual property unless otherwise agreed in writing.
27.2 The Client may retain and use project documents for operation, maintenance, insurance, compliance and administration of the Project.
27.3 The Client may not commercially reproduce or use GridSecure Energy’s proprietary design to procure a duplicate installation from another contractor without written consent, except where a legal right requires otherwise.
28. Subcontractors and Independent Specialists
28.1 GridSecure Energy may use suitably qualified subcontractors, specialists or professional service providers where reasonably necessary.
28.2 Independent services may include structural engineering, professional engineering, roof specialists, specialist commissioning or manufacturer technical support.
28.3 Independent professional services not included in the quotation will be charged only where separately approved by the Client.
29. Default and Suspension
29.1 If either party materially breaches the agreement, the other party may give written notice requiring the breach to be remedied within a reasonable period appropriate to the circumstances.
29.2 If the breach is not remedied, the innocent party may exercise any remedies available under the agreement and applicable law, including cancellation where legally justified.
29.3 Legal costs are recoverable only to the extent agreed, awarded or permitted by applicable law.
30. Dispute Resolution and Governing Law
30.1 The parties will first attempt to resolve disputes in good faith through written communication and reasonable access to inspect the alleged issue.
30.2 A technical dispute may, by agreement, be referred to an independent suitably qualified professional, mediator or arbitrator.
30.3 Nothing prevents a party from exercising any statutory right or approaching a court, ombud, consumer forum or other body with lawful jurisdiction.
30.4 The agreement is governed by the laws of the Republic of South Africa.
31. Personal Information
31.1 GridSecure Energy may process personal information reasonably necessary to prepare quotations, procure Goods, perform Services, register warranties, issue invoices and CoCs, provide support, process warranty claims and comply with legal obligations.
31.2 Personal information will be processed in accordance with the Protection of Personal Information Act 4 of 2013 (“POPIA”) and applicable law.
31.3 Information may be shared with manufacturers, distributors, professional service providers, utilities or authorities where reasonably necessary to perform the agreement or comply with legal obligations.
32. Electronic Communications and Certificates
32.1 The parties agree that quotations, invoices, notices, warranty documents, reports and certificates may be provided electronically.
32.2 A Certificate of Compliance may be delivered electronically where legally permissible.
33. General Provisions
33.1 Any project-specific amendment, addition or Variation must be recorded in writing.
33.2 Failure by a party to enforce a right immediately does not constitute a waiver of that right.
33.3 If any provision is found invalid or unenforceable, it will be severed or limited to the minimum extent necessary and the remaining provisions will continue to apply.
33.4 Headings are for convenience and do not affect interpretation.
33.5 These Terms must be interpreted consistently with applicable South African legislation.









